MINI DOUBLE CONE BLENDER

  • The conical shape at both ends enables uniform mixing and easy discharge.
  • All contact parts are made out of stainless 304 or 316 quality material, as required by customer.
  • Maximum care has been taken to ensure safe operation of the unit.
  • Manual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch. ( In 200 Kg & above model )
  • Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
  • Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with operable cover provided at other end of the cone for material charging & cleaning.
  • One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
  • Cone will be mirror polished from the inside & outside & structure will be matt polished.
  • All moving parts covered with SS304 covers.
  • Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
  • Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
  • As per customer requirement machine will be provided with left side drive or with right side drive.
  • The conical shape at both ends enables uniform mixing and easy discharge.
  • All contact parts are made out of SS304/316(as per customer requirement) quality material.
  • Maximum care has been taken to ensure safe operation of the unit.
  • Worm reduction gear use for speed reduction.
  • Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
  • Inside & outside of the cone will be polished to the mirror finished.
  • General structure made out of SS304 and Polished to the matt / mirror finish (as required by you) in GMP Model.
  • All safety guards & covers made out of SS304 in GMP Model. Hand wheel will be provided for manual tilting of cone.
  • Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.
Double Cone Blender

Technical Specifications

Model KSD-DCB-05
Capacity 05 Kg
Gross Capacity 10 Kg
Motor HP 1 HP
RPM 12 to 15 RPM